Press the program button on the interior unit twice. The bolt should retract to the unlocked position.

Kwikset SmartCode Touchpad Electronic Deadbolt 913

Some people really get confused about how to change code on keypad door lock and set a new combination of their choice.

How to change code on keypad door lock weiser. Page 6 62816 / 01 troubleshooting: = lock button d enter user code. Make sure their separate lock pin option is toggled on.

Program at least one user code. Programming the 2nd user code. Toenter a second code push the black button twice and repeat the samestep.

Wait a moment for the three lights and three beeps to repeat. To add a new entry code, press the schlage button and the number 1 button simultaneously to. In some cases,keypad on the outside of the door keyless entry system comes with the deadbolt in some cases with lever part of the handleset easy to use to unlock the door.

Make sure the door is open and in the unlocked position. Insert the exterior (keyed) side of the lock through the exterior side of your door. Just pull off the top back cover of the unit and you will find the simple step by step instructions on how to change the combination on the inside of the cover.

In 20 seconds, when the led flashes green and you hear one beep, the lock has been reset. Select the user you want to edit. Homeowners that haven’t changed the original code should find it written.

Press the “lock” button to save code. During normal operation, press the lock button to lock the door. It is recommended that you replace the default mastercode and default user code with codes of your own.

Keypad lock button smartkey keyway tool hole 3 press the program button once more. Enter a 4 to 10 digit code and press 4. The first step would be reprogramming the code for the lock.

4 perform the door handing process again to teach the lock the orientation of the door and add user codes to your lock. Press the “lock” button to save code. You can press the lock button before entering your user code to light up the keypad at night.

Manually put the bolt in the extended (lock) position. There are more than just a few types and designs available for keypad door locks. Press and hold the program button until the keypad 4.

Under lock access, select the door lock(s) you want the user to have access to. Securescreen ™ touch the numbers in any order to display the full touchscreen. Hold these two units in place, then insert screws into the interior side of the lock to fasten it to the door.

If no user codes are programmed, the lock button will be disabled. You will see a black button, push thisbutton once, enter your 4 or 8 digit code and press the lock buttonon the keypad and you will hear a beep to confirm the code. To unlock the door, touch the screen to activate securescreen ™.

Press the program button on the interior unit once. Procedure continued on next page 4 / 15 62810 / 01 usa: The door is now locked.

Programming instructions can also be found on interior of lock. Keypad flashes red 3 times with 3 beeps* unsuccessful programming. Enter the access code to unlock the lock.

If your old code still remains in the unit, you will need to perform a hard reset of the unit. Enter in 4 to 8 digit code onto the keypad. Line up the connecting rods and cylinder tailpiece to insert the interior trim.

Door handing process processus d'orientation de la porte the door handing process, step 21 in the installation guide (on the reverse side of this manual), is crucial for lock operation. Select lock pin to add or edit their door lock code. Auto lock a feature that will automatically lock your door after 30 seconds (optional).

The lock beeps, the keypad fl ashes red, and the door cannot lock or unlock. Easy to change the code and even gain access to a contractor or pet sitter or dog walker from a mobile app technology is awesome Enter in 4 to 8 digit code onto the keypad.

The process may sound a bit intimidating, but it’s actually pretty simple and straightforward. Programming instructions can also be found on interior of lock. Keypad flashes red 1 time with 1 beep* door jammed while attempting to lock.

Securescreen tm provides additional security by employing random digits prior to entering your personal code to prevent fingerprint and code detecton on the touchscreen surface. Yellow led flashes, then 1 beep 5. Fl ashes green (about 5 seconds).

Let’s find out how to change code on keypad door lock & set a new one. Pushing the shlage button and the 1 key primes the lock to accept a new entry code. You will see a black button, push thisbutton once, enter your 4 or 8 digit code and press the lock buttonon the keypad and you will hear a beep to confirm the code.

A complete programming and troubleshooting guide is Yellow led remains solid (awaiting button press; The lock will beep twice and the keypad will flash green.

Enter user code to be deleted. You should see the schlage button turn green, giving one long flash and one long beep. Normal operation switches, status led colors and keypad warnings switch function 1 door lock status led blinks every 6 seconds 2 lock.

Locked turnbutton the turnbutton cannot rotate. Enter in 4 to 8 digit code onto the keypad. Press the program button twice, enter the same or a new code and then press the lock button once.

To check if the door handing process was completed, temporarily place the battery cover on the lock interior, but do not secure with the provided screws. During normal operation, press the lock button after Press the 1 button and wait for the same three lights and three beeps.